Motors, Mounts, and Arms
May 21, 2013
Posted by on
The HobbyKing Gear!
The HobbyKing order arrived today. Time for some quick unwrapping and building.
RotorBone meet Park300
The RotorBone mounts aligned great to the bolt pattern on the motor. The included screws were a bit short and should be replaced with longer ones. In due time.
It only took about 30 minutes to bolt up all the motors and to cut the lengths of wood.
- 1 – 20 inch for the main arm
- 2 – 9 3/4 inch for the secondary arms
- 1 – 5″ x 5″ plexiglass square (main deck)
Tomorrow I’ll continue with the build focusing on completing the airframe. It should be interesting to see how everything turns out. I am not using plans and more or less making it up as I go along. Stay tuned.
Follow the full build process from the beginning: